Eurotech VoIP2 AII Series Manual de usuario descargar pdf (Pagina 62)

2009

EUROTECH USER MANUAL

VoIP

All™ Series: 4 Channel Gateway User Manual 62

Appendix A: Com Port

The Com Port connection, give you direct access to the Linux based operating system files of the

DSP.

1. Connect the Com Cable from the Gateway to the PC RS232 COM Port.

2. Connect the Hyper Terminal press "Disconnect" than "Properties".

3. In the "Connect To" tab press "Configure", The "Port Setting" should be:

4. Press "OK" and move to the Settings tab.

5. Press ASCII Setup:

6. Set this settings and press OK.

7. Press "Connect" in the Hyper Terminal.

8. When restarting the Gateway you will see the initialization process. Wait until it finished.

9. Press the Enter button. On screen you will see #.

10. To see the IP settings write the command ‘ifconfig’ and press Enter.

11.On screen the window below will appear:

1 2 ... 57 58 59 60 61 62 63 64

Sin comentarios

Eurotech VoIP2 AII Series Manual de usuario Pagina 62