Eurotech VoIP2 AII Series Manual de usuario descargar pdf (Pagina 37)

2009

EUROTECH USER MANUAL

VoIP

All™ Series: 4 Channel Gateway User Manual 37

1. Enter the Prefixes for this port. When a dialed number starts with this prefix the call will

automatically route to this port.

•

If the prefix of a port is ‘*’, then all the calls that do not conform to the other ports

prefixes will be routed through this port.

•

If two or more ports have the same prefix then the Gateway will rotate the calls

between the ports.

2. In the ‘Remove Prefix’ select box how many digits to remove from the beginning of the

dialed number.

3. In the ‘Add Prefix’ box select the digits to be added at the beginning of the number.

4. Select 'Include' in the 'Prefix Type', to call only the prefixes that are included in the table.

5. Select 'Exclude' to call only the prefixes that are excluded from the table.

6. In the ‘Incoming Calls Handle’ select the operation mode for each port:

• Dial Tone – All calls that come from this port will receive a dial tone to call any other

port.

• Blocked - All calls that come from this port will be blocked. The caller will hear a busy

tone.

• Destination Number - All calls that come from this port will automatically route to a

number according to the Incoming Calls Destination mode.

• In the ‘Incoming Calls Destination’ table (on right), choose the destination number

preference:

• Fixed – All incoming calls to this port will route to one predefined number (Num1.).

• Priority – All calls that come from a port in this mode will route to Num1, if the

number is busy / no answer (No Replay Timeout) / doesn't exist, the call will route to

the next number on the list, until there is an answer.

• Cyclic – The same as in Priority mode, except that each call will begin in the next

number on the list.

• Press Save to activate all the changes.

Note: After you finished dialing press # to dial the number as it is without waiting the Last Digit

Timeout.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

Sin comentarios

Eurotech VoIP2 AII Series Manual de usuario Pagina 37