Eurotech VoIP2 AII Series Manual de usuario descargar pdf (Pagina 46)

2009

EUROTECH USER MANUAL

VoIP

All™ Series: 4 Channel Gateway User Manual 46

These tables are saved in the PC software files only; it is not saved on the Gateway. So if you

connect from another PC it will not automatically appear.

Chapter 7.2: The SIM Server settings

After pressing the ‘Synchronization’ button, the getaway will read the SIMs list and the general

settings from each SIM Server it is connected to.

At the top of the list, in 'General' section you can see the general settings of the SIM server.

Below all the SIMs of the SIM Server are listed. The list is arranged according to SIM server, SIM

Server ‘cards’ and and the SIMs from 1 to 32 according to their location on the card.

For Each SIM you assign a profile to work with. All the SIM server settings will be saved in the

SIM server.

This setting will take effect when the SIM will register in the cellular network and start to work.

General Settings

To set the general settings of the SIM Server, click on the + sign to open the 'General' section.

Fig: the General settings of the SIM Server.

The SIM parameters are:

'IP Address' – The IP Address of the SIM Server.

'IP Address2' – The secondary IP Address (see Chapter 6.2.3).

'Port' – The port to access the SIM Server.

'SIM Port' – The port to access the SIMs data.

'Desc' – Define a name for the SIM Server.

‘Debug Level’ - Is the amount of detail to be shown on the Debug Screen. This level should be set

at 0.

'Initial Current Balance' – The "Current Balance" of new SIM will be set to this amount.

'VPN Enable' – Currently not in use.

'VPN IP Address' – Currently not in use.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 63 64

Sin comentarios

Eurotech VoIP2 AII Series Manual de usuario Pagina 46