EUROTECH USER MANUAL
VoIP
2
All™ Series: 4 Channel Gateway User Manual 53
Chapter 7.5: Test Call Profile
Test Call is a mechanism to randomly generate calls from the cellular ports to predefined
destinations. The mechanism can be used to test incoming calls to the cellular ports.
Select the ‘Test Call’ tab. To setup the 'Test Call' do:
1. Select the SIM Server to set the profile in.
2. Select the test call profile to set.
3. Define the profile parameters.
4. Press 'Save'.
The profile parameters are:
·
Min Call, Max Call - The length of the calls, a call will last a random amount of seconds
within this range.
·
Min Freq, Max Freq – The length of times between the calls, the time between calls will
be a random amount of seconds in this range.
·
Start Time – The time to start making the test calls.
·
End Time – The time to stop making the test calls.
·
Destination – the numbers to call, the calls will be randomly to one of the destinations.
SIMs that use this profile will operate like any other SIM until 'Start time', At 'Start time' the port
that use this SIM will make calls randomly to one of the numbers in the Test Calls profile, Each
call will be for a random amount of seconds between 'Min Call' and 'Max Call'. At the end of each
call the port will wait a random amount of seconds between 'Min Freq' and 'Max Freq' before the
next call. At 'End Time' the port will stop making the test calls.
Chapter 7.6: Test SMS Profile
Test SMS is a mechanism to randomly send SMS from the cellular ports to predefined
destinations, this mechanism can be used to test incoming SMS to the cellular ports.
Select the ‘Test SMS’ tab. To setup the 'Test SMS' do:
1. Select the SIM Server to set the test SMS profile in.
2. Select the test SMS profile that you want to set.
3. Define the test SMS profile parameters.
4. Press 'Save'.
Comentarios a estos manuales