EUROTECH USER MANUAL
VoIP
2
All™ Series: 4 Channel Gateway User Manual 24
3. Press "Save"
4. Open the Users window.
5. Add a new user with this account information:
The "VoIP Num" is the chosen extension number for this user.
The "Secret" is the chosen authentication password for this user.
The 'ID' should be set to an empty one.
The rest of the parameters are not relevant and should be set to '0'.
6. Open the configuration page of your SIP phone.
7. Set up the registration with this parameters:
The "SIP Server IP Address" is the IP address of the Gateway.
The "SIP User ID" is the "VoIP Num" of the user.
The ‘Authentication Password’, " is the "Secret" of the user.
8. Save the registration settings.
9. Register with the new account.
10. In the VoIP
2
ALL, open the 'SIP Status' window and see that the SIP phone registered.
4.2.2 Connecting an External IP PBX to the VoIP
2
ALL
To receive calls from an IP PBX or any SIP Server, you need to connect the IP PBX to the
Gateway. There are two ways to connect the external SIP: registering the SIP in the Gateway SIP
Server, or working without registration.
Registering external SIP Server in the Gateway SIP
The procedure is the same as in registering with VoIP Phone; see "Chapter 3.4 Internal SIP
Server".
1. Open the "SIP Registration" page of your SIP Server or IP PBX.
2. Setting up the registration parameters:
The "SIP Server IP Address" is the IP address of the Gateway.
The "SIP User ID" is the chosen number for this extension.
The ‘Authentication Password’, when working with authentication.
3. Save the registration settings.
4. Register with the new account.
Working without registration
1. Open the configuration page of your SIP Server or IP PBX.
2. Set up the "SIP Server IP Address" to the IP address of the Gateway.
3. Remove the mark from "Register in the domain”.
4. Save the configuration settings.
5. Now you will be able to call without registering your SIP.
Comentarios a estos manuales