Eurotech VoIP2 AII Series Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
2009
EUROTECH USER MANUAL
VoIP
2
All Series: 4 Channel Gateway User Manual 34
The charge calculation will be: 3 intervals of 1 unit per interval = 3 units.
The total amount of units for this call will be 4 + 3 = 7 units.
Limitation on the amount of Calls
With these feature you can limit the amount of calls the SIM will do in call duration mode.
In the Profile main page you can set the 'Max Call Count' and 'Min Call Count'. When these
parameters are set each SIM will make a random amount of calls within this range.
Setting Up the SIM Call Duration parameters
1. Go to the Profile tab in the 'Virtual SIM' window, select a profile.
2. Set this parameters:
Max Call Count.
Min Call Count.
3. Go to the 'SIM Prepaid'. Open the 'Charge Calculation'.
4. Open the 'Billing' menu.
5. Set this profile settings:
Primary Bill Interval.
Primary Cost per Bill Int.
Primary Interval Count.
Secondary Bill Interval.
Secondary Cost per Bill Int.
6. Press 'Save'.
7. Go to the 'SIM Servers' tab, select a SIM.
8. Set this settings:
Current Balance – The total amount of units for the SIM. It should be set always higher
then 0.
Profile – Select the index of the profile that you set in stage (4).
9. Press 'Save Card' to save the SIM settings.
Setting Up the Call Duration List of SIMs
1. Select a port from the list of the ports in the left.
2. In the ‘Type’ category, select the form of the timetable: monthly or weekly.
3. In the ‘Swapping Type’ category select ‘call duration.’
4. Select a SIM from the list of available SIMs at the top. The list is organized by the SIM
Servers.
5. The row of the timetable represents dates and the column the order on the list.
6. Left click will select the SIM for this time slot. A dialog box will open. Enter the amount of
units for this SIM.
7. The listing will appear in this format:
'SIM Server Card':'SIM Number'_ 'Amount of units'__-'SIM Server IP Address'
8. To un-select time slots simply click on it again.
9. Do not choose a SIM that is already in use at that day in another port.
10. After finishing setting the lists of SIM press ‘Save.’
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 63 64

Comentarios a estos manuales

Sin comentarios