Eurotech VoIP2 AII Series Manual de usuario descargar pdf (Pagina 16)

2009

EUROTECH USER MANUAL

VoIP

All™ Series: 4 Channel Gateway User Manual 16

Fig: Cellular Port Prefix.

In this example of prefix settings, only numbers that start with 052 will be called out through this

port, the 3 first digits will be removed and a 0 will be added in the beginning of the number.

For example:

Original number = 0525555555.

Called number = 05555555.

Chapter 3.7: Dialing

Here are few examples of making calls with the VoIP

ALL.

Dialing from a mobile phone to a VoIP extension

To call a VoIP extension from a mobile phone through Port 1 with the default prefix settings:

• Dial the number of the SIM card in port 1.

• Hear a dial tone.

• Dial 9 plus the VoIP extension number (9 is the default prefix setting for VoIP)

• i.e. 9100 (when 100 is the voip extension)

• The call will route to the VoIP extension.

Dialing from a VoIP extension to a mobile phone

To call from a VoIP extension to mobile phone with the default prefix settings:

• Pick up the VoIP extension and hear a dial tone.

• Dial the cellular mobile number.

• The call will route to Mobile phone through the first available cellular port.

Note: If the mobile number start with 9, then you must setup the prefix of the VoIP to a

different number, otherwise the call will route to the VoIP.

Dialing through a specific port

To call a mobile phone through a pre-defined specific port:

• Set the 'Prefix' of this port to certain number (6).

• Set the 'Remove Prefix' to the number of digits in that prefix (i.e. 1).

• Save the prefixes settings.

• Pick up the VoIP extension and hear a dial tone.

• Dial the prefix and the mobile number. i.e. 605555555 (when 05555555 is the mobile

number)

• The call will route through this port

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 63 64

Sin comentarios

Eurotech VoIP2 AII Series Manual de usuario Pagina 16