Eurotech VoIP2 AII Series Manual de usuario descargar pdf (Pagina 20)

2009

EUROTECH USER MANUAL

VoIP

All™ Series: 4 Channel Gateway User Manual 20

To assign a SIM to work at a specific time:

1. Go to the 'Ports' window.

2. Select a port from the list of the ports on the left.

3. Open the 'Time Table' tab.

4. In the ‘Type’ category, select the form of the timetable: monthly or weekly.

5. In the ‘Swapping Type’ category, select ‘time table.’

6. Select a SIM from the list of available SIMs at the top.

7. The top row of the Timetable represents dates and the left column represents hours.

8. Each time slot is for a period of one hour.

9. Left click will select the SIM for this time slot and mark it with it’s corresponding number.

10. You can mark a range of time by dragging the mouse while holding the left click.

11. To un-select time slots simply click on it again.

12. You are unable to choose a SIM that is already in use at that time in another port on the

Gateway.

13. After setting all the needed SIMs press 'Save'.

SIM Swapping Limitation

'SIM Swapping' – The procedure of switching from one SIM to another. If the same SIM continue

to the next day it will count as another swap.

There is a firmware limitation of 400 SIM swapping for each port.

Fig: Example of 3 time slots.

Chapter 3.12: Working behind NAT

When the gateway is working behind NAT or Firewall, you have to make sure that the ports of

the gateway are accessible from the outside.

These are the ports that need to be open:

Port 2007 need to be open to connect with the PC software.

Port 2008 and port 2009 need to be open to allow access to the internal SIM server.

Ports 5060 – ports 5100 need to be open for the SIP calls and RTP packets.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Sin comentarios

Eurotech VoIP2 AII Series Manual de usuario Pagina 20